emerio FN-108451.1 Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
FN-108451.1
PARTS DESCRIPTION
1. Fan blade
2. Front grille
3. Body
4. Control panel
Control panel
: Power on / off
: Front grill oscillation is activated
: Front grill oscillation is deactivated
Remote control
Notice! This unit has a remote control which is stored in the control panel recess. One piece of CR2025 battery
will be provided with the unit. Before starting to use the remote control, remove the plastic protection from
the battery. The functions of the remote control buttons are the same as of the buttons on the control panel.
Take out the remote control from the control panel recess. Press the two positions show as below and then
tilt the remote control out.
OPERATION
1. Plug the appliance into a suitable power socket. The appliance is on standby and ready for use.
2. Press the power button to turn on the fan. The appliance starts working at low speed and both of the LED
lights of "
" & "
3. Press buttons on control panel to choose your desired speed setting / oscillation function.
4. After use, press the power button again and unplug the appliance.
CARE AND CLEANING
CAUTION: ALWAYS UNPLUG THE PRODUCT FROM THE ELECTRICAL OUTLET PRIOR TO CLEANING IT.
1.
Do not use the product in oily or dirty areas, as the air vents may become blocked.
2.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it
down with a damp cloth and then dry it carefully. Always take out the mains plug first.
3.
Store the product in a cool, dry place.
" illuminate.
: Fan with low speed
: Fan with medium speed
: Fan with high speed
- 4 -
EN

Publicité

Table des Matières
loading

Table des Matières