Geemarc LoopHEAR 102 V2 Mode D'emploi page 9

INSTALLATION
Replace the base plate by placing the hook found on the bottom
TM
left of the LoopHEAR into the catch on the base plate. Press
TM
the LoopHEAR down gently until you hear a click.
Hook
Catch
Plug the power cable into the power socket found on the rear of
the unit. Plug the adaptor into the mains supply and switch the
supply on.
Strain Relief
Please use the strain relief mechanism as displayed. This provides
extra protection for the cable at the connection point. It will extend
the life of the power cable and reinforce the connection to the
equipment.
8