Locating The Loophear Tm - Geemarc LoopHEAR 102 V2 Mode D'emploi

The LoopHEAR
before it's first use.
The WHITE LED indicatory below the
handle will light up when the batteries
are charging. The LED indicator will
turn GREEN when the batteries are
fully charged but when charging the
first time, let the batteries charge for
about 8 hours before use.
Locating the LoopHEAR
In order to receive the optimal sound from the LoopHEAR
ideal location is facing the user. There are two options when
locating the LoopHEAR
Fully Portable
The LoopHEAR
without the base plate attached. It can be used in a variety of
locations with no setup required and can be used immediately.
Semi Fixed
If you want to ensure the LoopHEAR
can be used as a semi fixed unit as follows:
1) Choose the location to fix the LoopHEAR
range of coverage available (see below). Ensure you make full use
of it.
2) Remove the base plate – as described in Battery Charging above.
3) Screw the base plate to the table or desktop with the screws
provided.
4) Replace the base plate – as described in Battery Charging above.
INSTALLATION
TM
Batteries will need to charge for 8 hours
TM
TM
.
TM
can be used as a fully portable unit with or
LH102
120°
TM
stays in one place, then it
TM
. Please bear in mind the
9
TM
, the
400 mA p/m
at 0.8 m