Crivit 275342 Notice D'utilisation page 32

Headband width adjustment (Fig. D)
Use the wheel for variable adjustment to your head size to ensure
the helmet is seated optimally. Turn the wheel clockwise to tighten the
headband and counter-clockwise to loosen the headband.
Opening and closing the magnet lock
(Fig. E/F)
In order to close the buckle, slide the upper section of the buckle
over the lower section. The magnets will click audibly into place.
Pull on the chinstrap to test that the magnet lock is securely closed.
In order to open the buckle, slide the upper section away from the
lower section until the magnets release.
Maintenance and care
Regular maintenance and care contributes to ensuring the safety and
preservation of the helmet.
• Always use a pH-neutral detergent diluted in clear water; carefully
rub with a soft cloth. Then dry with a lint-free cloth.
• The padding may be cleaned with a little soap, using a soft brush.
Inner pads
• Hand wash below 30 °C.
30 °C/86 °F
• Allowed to dry at room temperature.
34 GB