Publicité
Les langues disponibles
Les langues disponibles
• The chin strap must be closed firmly for a secure seat. It is fitted
correctly when it is difficult to slide your fingers under the chin
straps. However, you must still be able to comfortably breathe,
swallow and turn your head.
• The helmet is seated correctly if it is tight, yet comfortable on your
head (Fig. B).
• If the helmet is too large (wiggles, cannot be adjusted tightly
enough) or too small (pinches, forehead exposed), please select
the next larger or smaller size.
• Two additional sets of internal pads of different thicknesses are
supplied with the article for further size adjustment. If the fitted
internal pads do not correspond to your head size, then remove
them and replace them with a different pair of internal pads.
• Never use the helmet if it cannot be adjusted correctly.
Adjusting the chin strap (Fig. C)
The general length of the chin strap can be adjusted with the loop.
You can also adjust the length of the chinstrap using the strap divider.
Please ensure that the strap divider does not bother you, the straps
do not cover your ears, and the fastener does not rest on your chin.
GB
33
Publicité
