Customising A Timer Programme - OERTLI OETRONIC 4 Notice D'installation, D'utilisation Et D'entretien

RS400R - Package AD255
+
MODE
%
0 2 4 6 8 10 12 14 16 18
$
MODE
C002393-C
1 2 3 4
1 2 3 4
%
0 2 4 6 8 10 12
$
MODE
C002436-A
2009-07-31 - 300020545-001-A
2"
A000858-A
20 22 24
5 6 7
5 6 7
14 16 18 20 22 24
3x
To go back to the previous display, press the key r.
3.2.2.

Customising a timer programme

Only the timer programmes P2, P3, P4 and the domestic hot water
programme P r can be modified.
1. Press the MODE and r keys simultaneously for 2 seconds. The
time is displayed.
2. Turn the rotary button to select the timer programme to be
modified. To confirm, press the rotary button.
To go back to the previous display, press the key r.
3. All of the days flash. The new programme will be active every
day of the week.
To modify the programme for a particular day, press the rotary
button several times until the desired day flashes.
4. Turn the rotary button to the left until 0.00 is displayed. The first
segment of the graphic bar for the timer programme flashes.
5. b : Comfort mode selection
Press the Cx key. The symbol b is steady, the selection mode
for the comfort time ranges is active.
To select a comfort time range, turn the rotary button to the right.
The zone selected is displayed under b on the graphic bar.
v : Reduced mode selection
Press the Cm key. The symbol v is steady, the selection mode for
the reduced time ranges is active.
To select a reduced time range, turn the rotary button to the
right. The zone selected is displayed under v on the graphic bar.
6. To return to the principal display, press the MODE key or wait 20
seconds.
3. Operating instructions
10