5
Buttons / connections
(See picture on folded cover page)
1.
LCD display
2.
Up key
3.
Down key
4.
Redial key
5.
Delete key
6.
Program key
7.
Ringtone / Hold key
8.
Calculator key
9.
Flash key
10.
Volume key
11.
Dial out key
12.
Handsfree key
13.
Numerical keypad
14.
Curl cord connection
15.
Hook Switch
6
Installation
Put batteries in the battery compartment to acti-
vate the display :
•
Open the battery compartment at the bottom
of the unit.
•
Insert 3 Alkaline AA standard batteries.
•
Close the battery compartment.
•
Connect one end of the line cord to the
telephone line wall socket and the other end
to the backside of the telephone.
The telephone line needs to be
disconnected prior to opening the
battery door!
7
Telephone settings
7.1
Set the time and date
When you have a subscription to the caller ID ser-
vice and your telephone provider sends the date
and time together with the telephone number, the
phone's clock will be set automatically. The year
must always be set manually !
•
Press
•
Use
/
to select "
•
Press
to enter the settings
•
Use
/
to change
Topcom TE-6602/03
set date
"
•
Press
to move to the next digit
to exit the menu
•
Press
7.2
Set the area code
When you have a subscription to the caller ID ser-
vice it can be necessary in some countries to en-
ter your area code. When the telephone receives
a caller ID it will remove the entered area code
from the incoming number.
•
Press
to enter the menu
•
Use
/
to select "
•
Press
to enter the settings
•
Use
/
to change
•
Press
to move to the next digit.
•
Press
to exit the menu
7.3
Set the PBX code
When your phone is connected to a PBX system
you can enter the PBX line access code.
The line access code will be added when dialling
out a number from the caller ID list.
•
Press
to enter the menu
•
Use
/
to select "
•
Press
to enter the settings
•
Use
/
to change select the digit
•
Press
to move to the next digit.
•
Press
to exit the menu
7.4
Set the operator prefix code
When you have subscribed at an alternative oper-
ator it sometimes is required to dial a prefix in front
of the telephone number.
When entering the prefix, the phone will automat-
ically add the prefix in front of the dialled number.
For example:
Operator prefix: 1234
Number to be dialled : 012345678
Number dialled by the phone: 1234012345678
•
Press
to enter the menu
•
Use
/
to select "
•
Press
to enter the settings
•
Use
/
to select "ON" or "OFF"
•
Press
•
Enter the prefix
Topcom TE-6602/03
set CODe
"
pCOde
"
autO 1p
"
7