JUKI CP-180 Manuel D'utilisation page 43

校正用
Example) Setting of the thread trimming function to the input option port.
The lamps will light up alternately.
The lamps will light up alternately.
1) Select function number 12 according to the function
setting method.
2) Select the item of " " by switch 3 .
3) Select 901 port by switch 2 .
" thread trimming function by switch 3 .
4) Select "
" thread trimming function by switch 2 .
5) Fix "
6) Set activation of signal by switch 3 . If the thread
trimming is performed by "Low" signal, set the dis-
play to " ", and if the thread trimming is performed
by "High" signal, set the display to " ".
7) The above function is fi xed by switch 2 .
8) The option input is ended by switch 2 .
9) Select the item of "
the function setting mode.
- 17 -
" by switch 3 , and return to