Pipmix Mode - Brandt Transferpette electronic Mode D'emploi

5.2 PIPmix mode

Program for mixing liquids. Sample is aspirated and dispensed repeatedly.
Volume and speed setting, see Set volume, p. 51 and Set the aspiration and dispensing speed, p. 52.
a.
3 x
b.
c.
1 x
d.
1 x
e.
1 x
Transferpette® electronic 997209
a.
Call up menu selection: Pressing the menu key three
times takes you to the program selection.
ð
'Mode' flashes.
b.
Set PIPmix mode: Use one of the arrow keys to scroll
through the modes until 'PIPmix' appears.
ð
'Mode' continues to flash.
c.
Confirm PIPmix mode: Press 'Enter' key.
ð
The display now shows 'blo' for blow-out.
d.
Preparing for pipetting: Press the pipetting key once to
move the piston to its start position.
ð
The arrow in the display points upwards (aspiration).
e.
Aspirate liquid: Press the pipetting key once to aspirate
the liquid.
5 Pipetting programs
57
Operating manual