LENCO DAR-060 Mode D'emploi page 10

1. Press the MENU button to access the menu control.
2. Press the PREVIOUS
3. Press the PREVIOUS
4. Press the MENU button to exit the menu control.
Note:
- Not all DAB broadcasts are able to use DRC function. If the broadcast does not support DRC then the DRC setting in the
unit will have no effect.
- After you have adjusted the DRC level the sound may be louder.
Prune
This function removes inactive stations.
1. Press MENU button to access the menu control.
2. Press the PREVIOUS
3. Press the PREVIOUS
4. Press the MENU button to exit the menu control.
FM RADIO OPERATION
Auto Scan
1. Turn on the unit in FM mode.
2. Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 20 storage).
Manual Scan
1. Press the TUNE
2. Alternatively press and hold the TUNE
Storing FM Presets
You can save up to 20 FM stations.
1. Tune to the station you wish to store.
2. Press and hold the MEM/PROG button. Flashing preset channel number is displayed.
3. Press the CH- or CH+ button to a preset number that you want to store. Then press the ENTER button to save. A
confirmation message is displayed.
Recall Stored FM Presets
Press the CH- or CH+ button directly tune to the preset channel.
Or press the [MEM/PROG] button once. Then press the CH- or CH+ button to a preset number that you want to recall and
press the ENTER button to confirm.
To directly recall the preset channel by using the numeric buttons, press the numeric buttons [1], [2], ..., [0]. For example
when the button [3] is pressed and then follow by pressing the ENTER button, it will tune to preset channel 3. Or when the
button [1] and then button [2] are pressed and then follow by pressing the ENTER button, it will tune to preset channel 12.
Stereo/Force Mono Selection
When receiving a Stereo FM radio station, press the MONO/ST button will switch between stereo audio and force mono
audio.
Displaying FM Station Information
There are several types of information as listed below. To change the display information press the INFO button
repeatedly.
1. Radio Text
Scrolling text which shows information on music titles or program details provided by the radio station.
2. Program Type (PTY)
Type of program provided by the broadcaster
3. Frequency
Current channel frequency
4. Audio Type
Stereo or Mono
5. Time
Displays the time provided by the radio station.
6. Date
Displays the current date provided by the radio station.
OTHER FM MENU OPERATION
Press the MENU button to access the menu control. Then press the PREVIOUS
options as described below.
or NEXT button until "DRC" is displayed and then press the ENTER button.
or NEXT button to select the DRC value and then press the ENTER to confirm.
or NEXT button until "Prune" is displayed and then press the ENTER button.
or NEXT button to select "<Yes>" and then press the ENTER button to prune the unit.
or TUNE button repeatedly to tune to a different frequency.
or TUNE button to automatically search to the next available station.
10
or NEXT button for different