Publicité
Les langues disponibles
Les langues disponibles
Scan Setting
1. Press the MENU button to access the menu control.
2. Press the PREVIOUS
3. Press the PREVIOUS
press the ENTER button confirm. When "All stations" is selected, all stations will be detected during FM scanning even
if the radio station is noisy. When the "Strong station" is selected, only the strong stations are detected. Scanning will
ignore the noisy stations.
4. The next time doing a FM scan the unit will search for the stations based on this confirmed setting.
Audio Setting
1. Press the MENU button to access the menu control.
2. Press the PREVIOUS
3. Press the PREVIOUS
then press the ENTER button confirm.
CD OPERATION
Loading and Playing CD Disc
Press the SOURCE button to CD mode. Press the OPEN/CLOSE button to eject the CD compartment door. Install a disc
with the CD label side facing up. Press the OPEN/CLOSE button again to close the CD compartment door. After reading,
the total number of tracks will be shown on the display. It will automatically start to play.
Play/Pause Control
To pause playback press the CD PLAY/PAUSE
Stop Control
To stop playback press the STOP
Skip Track
During playback press the PREVIOUS
Direct Select Track
Press the numeric buttons [1], [2], ..., [0] to directly select the desired track to play. For example when the button [3] is
pressed and then follow by pressing the ENTER button, it will jump to track 3 to play. Or when the button [1] and then
button [2] are pressed and then follow by pressing the ENTER button, it will jump to track 12 to play.
High-Speed Music Search
During playback press & hold the PREVIOUS
When you release the PREVIOUS
Repeat Playing
During playback press the REPEAT
repeatedly. Press the REPEAT
the REPEAT
button again to resume normal playback.
Random Play
During playback press the RANDOM button to play music in random order. The display will show "RANDOM". Press the
RANDOM button again to resume normal playback.
Programmed Playback
This unit can be programmed to play a sequence of tracks selected.
Insert a disc and in stop mode press the MEM/PROG button. "P-01" is shown with "01" flashing in "T-01" shown.
1.
2.
Press the PREVIOUS
3.
Press the MEM/PROG button to save the desired track.
4.
Repeat steps 2-4 to program up to 32 programmed tracks.
5.
Press the CD PLAY/PAUSE
6.
To clear the program play, press the STOP
During program play you can also do the "Repeat One" or "Repeat All" operation. But during the program play,
7.
random play is not supported.
BLUETOOTH AUDIO
Please follow the pairing instructions below to link the unit to your Bluetooth device.
1. Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show "Bluetooth". It will start
searching and will display a flashing "BT AUDIO".
or NEXT
button until "Scan setting" is displayed and then press the ENTER button.
or NEXT
button to toggle between "All stations" or "Strong station" selections and then
or NEXT
button until "Audio setting" is displayed and then press the ENTER button.
or NEXT
button to toggle between "Stereo allowed" or "Forced mono" selection and
button. Press the button again to resume playback.
button.
or NEXT
or NEXT
or NEXT
button normal speed playback will resume.
button once the display shows "REP_ONE". The current track will be played
button again the display shows "REP_ALL". All tracks will be played repeatedly. Press
or NEXT
button to select the desired track.
button to play according to the programmed track.
button twice or change to another mode.
button to search to the previous or next track.
button to start high-speed searching.
11
Publicité
