LENCO DAR-060 Mode D'emploi page 13

9. Press the PREVIOUS
the timer on/off setup.
10. Press the TIMER button to activate the timer schedule. A timer symbol will be shown on the display.
Note:
- Press the TIMER button again will deactivate the timer schedule.
TIME SETUP
This setup allows you to setup 4 different display modes. They are set Time/Date, time update mode, set 12/24 hour
display and set date format
Set 12/24 Hour Display
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS
4. Press the PREVIOUS
5. Press the PREVIOUS
press the ENTER button to confirm.
6. Press the MENU button to exit the menu control.
Set Date Format
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS
4. Press the PREVIOUS
5. Press the PREVIOUS
Select your desired and then press the ENTER button to confirm.
6. Press the MENU button to exit the menu control.
Auto Update
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS
4. Press the PREVIOUS
5. Press the PREVIOUS
 "Update from Any": Time/Date will be updated by either DAB or FM broadcast
 "Update from DAB": Time/Date will be updated by DAB broadcast only
 "Update from FM": Time/Date will be updated by FM broadcast only
 "No update": Time/Date will never be updated by broadcast
6. Select your desired and then press the ENTER button to confirm.
7. Press the MENU button to exit the menu control.
Set Time/Date
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS
4. Press the PREVIOUS
5. Hour digits will be flashed. Press the PREVIOUS
ENTER button.
6. Minute digits will be flashed. Press the PREVIOUS
the ENTER button.
7. If 12 hour display is set, "AM or "PM" will be flashed. Press the PREVIOUS
and then press the ENTER button to confirm.
8. Then the unit will request to set the date. Follow the similar procedures as listed above to complete the setup.
9. Press the MENU button to exit the menu control.
LANGUAGE SETUP
You can set the unit's language.
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS
4. Press the PREVIOUS
and then press the ENTER button to confirm.
5. Press the MENU button to exit the menu control.
or NEXT button to set the timer on volume level. The press the TIMER button to finish
or NEXT button until "Time" is displayed and then press the ENTER button.
or NEXT button until "Set 12/24 hour" is displayed and then press the ENTER button.
or NEXT button to toggle between 12 or 24 hour display. Select your desired and then
or NEXT button until "Time" is displayed and then press the ENTER button.
or NEXT button until "Set date format" is displayed and then press the ENTER button.
or NEXT button to toggle between "DD-MM-YYYY" or "MM-DD-YYYY" date display.
or NEXT button until "Time" is displayed and then press the ENTER button.
or NEXT button until "Auto update" is displayed and then press the ENTER button.
or NEXT button to change between
or NEXT button until "Time" is displayed and then press the ENTER button.
or NEXT button until "Set Time/Date" is displayed and then press the ENTER button.
or NEXT button until "Language" is displayed and then press the ENTER button.
or NEXT button to toggle between different languages. Select your desired language
or NEXT button to change to hour value and then press the
or NEXT button to change to hour value and then press
13
or NEXT button to set AM or PM