Body Analysis - ADE BA 1702 Mode D'emploi

2. Press and hold SET for a few seconds.
The display shows
3. Using the or the
4. Press SET.
Using the or the
5. Press SET.
On the display, the preset value for height (e.g. "165" for cm) will flash.
6. Using the or the
7. Press SET.
On the display, the preset value for age (preset: 25) will flash.
8. Using the or the
9. Finally, press SET. You have thus entered the required data.
The display shows "0.0" and you can have your body analysis done.
If you do nothing else, the scales will automatically switch off after a few seconds.
‚ If you hold down the
flow of the displayed data will occur more quickly.
‚ Entered data can only be overwritten by making a new entry.
‚ If the time interval between the two keystrokes is more than
20 seconds, the scale will switch off and you should repeat the
procedure.

Body analysis

‚ Body analysis is only possible if your data has been entered (see
previous chapter).
‚ See the chapter "Weighing Tips".
1. Press SET to switch on the scale.
2. Using the or the
your personal body data.
The data is briefly displayed, then "0.0" and the selected unit of measurement, e.g.
"kg".
3. Position yourself barefoot on the scales. Remain standing still and do not hold on to
anything.
− In doing so, ensure each foot is placed on a sensor.
− There must be no contact between your feet, your legs, your calves, or your
thighs. Otherwise, the measurement will be imprecise.
Body Analyser Scales BA 1702 | BA 1703
and a memory cell number (1-10) blinking.
button, select the desired memory cell.
button, choose your sex: for male, or for female.
button, enter your height.
button, enter your age.
or the
button, select the memory cell in which you have recorded
button, the forward and backward
Body analysis
25