ADE BA 1702 Mode D'emploi page 21

RISK of fire/burning and/or explosion
‚ There is a risk of explosion if batteries are replaced incorrectly. Replace the
battery using only the same or an equivalent type of battery. Pay attention to the
"Technical Data".
‚ Batteries must not be recharged, reactivated by other means, dismantled, thrown
into fire, or short-circuited.
‚ Avoid contact with skin, eyes, and mucosa. If contact is made with the battery
fluid, rinse the affected areas immediately with plenty of clean water and see a
doctor straight away.
WARNING against risk of injury
‚ Do not step onto the outer edge of any one side of the scales. Risk of tipping!
‚ Do not step onto the scales with wet feet or when its surface is damp. Risk of
slipping!
‚ The weighing surface is made of glass. If you fall down, there is a risk of the glass
breaking and thus a risk of injury from glass splinters.
BEWARE of material damage
‚ Place the scales on a stable, even surface.
‚ Do not overload the scales. Pay attention to the "Technical Data". Place yourself on
the scales exclusively for weighing purposes.
‚ Protect the scales from sharp jolts and vibrations.
‚ Remove the battery from the scales once it has been used or when you are no
longer using the scales. You will thus avoid damage that may result from the
leakage of battery acid.
‚ Pay attention to the correct polarity (+/-) when exchanging the battery.
‚ Do not subject the battery to any extreme conditions, by – for example – storing it
on radiators or under direct sunlight. Increased risk of leakage!
‚ Clean the battery and device contacts, as needed, before inserting the battery.
‚ Do not make any modifications to the item. Only allow repairs to be carried out at
a specialist workshop. Repairs carried out incorrectly can considerably endanger
the user.
‚ There are feet on the underside of the scales. Since surfaces are made from various
materials and are treated with diverse care products, the possibility cannot be
completely excluded that some of these substances contain constituents that
attack and soften the feet of the device. If necessary, place an anti-slip underlay
beneath the scales.
Body Analyser Scales BA 1702 | BA 1703
Safety
21