Rear Panel Connections - Cambridge Audio azur 540C V2.0 Mode D'emploi

REAR PANEL CONNECTIONS

1
Mains Voltage Selector Switch (50 / 60Hz)
On
2
Power AC
Manufactured in an
ISO9002 approved facility
1 Mains Voltage Selector Switch
Switches the mains voltage between 115V and 230V. For use by
installer/dealer only.
2 AC power socket
Once you have completed all connections to the amplifier, plug the AC
power cable into an appropriate mains socket. Your compact disc player
is now ready for use.
3
Power On/Off
Switches the unit on and off.
4 Control Bus
In - Allows un-modulated commands from multi-rooms systems or other
components to be received by the unit.
Out - Loop out for control bus commands to another unit.
6 Azur compact disc player
3 4
Class 1 Laser Product
Luokan 1 Laserplaite
Klass 1 Laserapparat
Control Bus
In Out
Power
Off
5 6
IR Emitter
In Left
Right
Line Output
5 IR (Infra Red) Emitter In
Allows modulated IR commands from multi-room systems to be received by
the unit. Commands received here are not looped out of the Control Bus.
6 Line Output
Use good quality interconnect cables from these sockets to any line level
input on your amplifier.
7 S/P DIF Co-a a xial Digital output
For input to a separate DAC or digital recording machine. To obtain best
results, use a high quality 75 ohm digital RCA interconnect cable (not
one designed for normal audio use).
8 Toslink Optical Digital output
Use to connect to the input of a separate DAC or digital recording
machine. Use a high quality TOSLINK fibre optic interconnect cable
designed specifically for audio use.
7 8
Designed in London, England
Digital Outputs
azur 640C Compact Disc Player V2.0
Max Power Consumption : 18W
Risk of electric shock
Caution
Do not open
Risque de choc electrique
Avis
Ne pas ouvrir
S/P DIF Toslink
Vorm offnen des gerates
Achtung
Co-axial Optical
Netzstecker ziehen
www.cambridge-audio.com