Profi Cook PC-EKI 1016 Mode D'emploi page 43

• Put a suitable pot on the cooking zone.
• Press the ON/STANDBY button (6), to start
cooking. The indicator lamp on the ON/STAND-
BY button (6) will be on continuously.
NOTE:
Press the FUNCTION button within 1 minute;
otherwise the cooking plate will return to
standby mode.
Select Temperature or Power As Function
• Press the FUNCTION (2) button to select tem-
perature or power control. The indicator lamps
TEMP. and/or POWER show the options.
Select Temperature or Power For The Cooking
Plate
• Repeatedly press the " " or " " (3 or 4) button
to select one of the six power or temperature
settings.
NOTE:
• The cooking plate always starts on temper-
ature 180°C or power level 4 respectively.
• The indicator lamps show selected level /
temperature.
• The cooking plate automatically turns
off after 120 minutes if no further input is
detected.
• On power level 1 food can be kept warm
for 8 hours. Then the cooking plate turns
off automatically.
BOOST Button
The BOOST function can be separately activated
to quickly heat up on the highest power or tem-
perature setting. The BOOST button (1) indicator
lamp lights up.
The function can be deactivated by decreasing
power or temperature with the " " button or by
pressing the BOOST button again.
In this case the temperature is reset to 180°C.
Enter Off Time
The TIMER button is used to limit the cooking
time.
• Switch the appliance on and select the desired
setting.
• Press the TIMER (5) button. The TIMER (5)
indicator lamp lights up.
• Set the off time between 1 minute and 3:00
hours with the " / " buttons.
NOTE:
• Briefly press the " " or " " button to set the
time in 1-minute steps.
• Press and hold the " " or " " button to set
the time in 10-minute steps.
• Pressing the " " button sets the timer to
3:00 hours. In this way you can set the
time in reverse.
• The time value first flashes a few seconds
after setting, then lights up continuously.
• The cooking plate turns off automatically
after the preset time and a beep tone
sounds.
• Once the time is set it cannot be changed.
In this case clear the timer and programme
again.
Delete the time
• If you would like to delete the preset times,
press the TIMER (5) button, so that the control
lamp goes off.
Automatic shut-off
The hot plate turns off automatically after 120
minutes, if no input was given over the opera-
tor control panel during this time. This switching
serves as security for you.
NOTE:
On power level 1 food can be kept warm for 8
hours. Then the cooking plate turns off
automatically.
43