mundoclima BBC 200 Manuel D'installation page 99

10 - CONTROL
Icon ' ' will flash, and icon
Set the hour
Confirm the hour setting.
Then the minute value of clock will flash slowly.
Set the minutes
Confirm the disinfect clock setting and quit out.
Unit will automatically start disinfect function at the above-set clock every 7 days.
If user don't set disinfect clock, unit will automatically start disinfect function at 23:00 every 7 days.
If unit is OFF or under disinfect mode, press
9 - VACATION
Enter vacation setting.
Press
Icon will flash
Icon will be lightened.
Will show the last setting vacation days.
Set vacation days. The days range is 1~99 days (default as 14 days).
Confirm vacation setting and quit out.
The unit will immediately go into vacation mode.
In vacation mode, the setting target water temperature is 15°C as default.
will show the remanent vacation days.
On the last day of vacation, unit will automatically start Disinfect function, and automatically reset the target
temperature to the last one before vacation.
If unit has already been under vacation mode or OFF, press VACATION will lead to show
8.2 COMBINATION BUTTON
Press the two buttons at the same time to clear all stored error & protect codes,
Clear error code
and the buzzer will buzz one time.
Press the two buttons at the same time for 1sec to go into diagnostic function.
Under
by pressing
Diagnostic function
Press button for 1sec. or no button
diagnostic function.
will be lightened and the hour value of clock will flash slowly.
will lead to show
user can check unit setting & running parameters
diagnostic mode
.
buttons
on the display.
operation for 30 sec, then quit
SET
DAY
on the display.
+
+
43