mundoclima BBC 200 Manuel D'installation page 95

10 - CONTROL
13.1 - Water Temperature setting
Icon SET will be lightened when setting water temperature or setting days for vacation.
13.2 - Date setting (Day)
Icon DAY will be lightened when setting days for vacation;
Icon DAY will be lightened when under vacation mode.
14 - Programmes (Timer)
There are six timers can be set.
If anyone of them has been set, icon
If there is none of timers has been set, will keep extinguished.
If timer is being set, icon
been set.
15 - Clock and clock setting
Icon shows the clock.
Whenever there is any setting for clock, SET CLOCK will be lightened.
Any press of button is effective only under button and display unlocked state.
1 - Manually turn e-heater ON (E-heater)
If E-heater is OFF, follow these steps below to manually turn it on.
Press
Icon will flash.
Press
For confirm manually turning E-heater on, then E-heater is activated to Heat up water to the target temperature.
After that, if need manually turn E-heater on again, please repeat these steps.
If E-heater is already ON, Press "E-HEATER" will lead to show invalid icon
Long pressing the "E-HEATER" key for 10 sec. then can shift to set the temperature display unit; from "°F" to "°C" or
from "°C" to "F"; the default is "°C"; (when it's shifted to display "°F", it still will display "°C" while it operates spot
check).
(SET)
will lighten the corresponding one when screen is unlocked;
will flash the corresponding one with 2 sec. frequency as well lighten the timer which has
on the display.
E-HEATER
39