Device Description; Scope Of Delivery; Intended Use - Scheppach GP1000 Jet LCD Traduction Des Instructions D'origine

Masquer les pouces Voir aussi pour GP1000 Jet LCD:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30

2. Device description

1. Pressure connection
2. Transport handle
3. LCD monitor
4. MODE button
5. SET button
6. CHECK button
7. Bracket for screws
8. Water filling plug
9. Water drain plug
10. Suction connection
11. Screw-on pre-filter cap
12. Pre-filter

3. Scope of delivery

• Operating manual
• Automatic domestic water pump

4. Intended use

The equipment is to be used only for its
prescribed purpose. Any other use is
deemed to be a case of misuse. The us-
er / operator and not the manufacturer will
be liable for any damage or injuries of any
kind caused as a result of this.
To use the equipment properly you must
also observe the safety information, the
assembly instructions and the operating
instructions to be found in this manual. All
persons who use and service the equip-
ment have to be acquainted with this
manual and must be informed about the
equipment's potential hazards.
It is also imperative to observe the ac-
cident prevention regulations in force in
your area. The same applies for the gen-
eral rules of health and safety at work.
22 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
The manufacturer will not be liable for any
changes made to the equipment nor for
any damage resulting from such changes.
Area of application
• For watering and irrigation of green are-
as, vegetable beds and gardens.
• For operating lawn sprinklers.
• With pre-filter for drawing water from
ponds, streams, rainwater barrels, rain-
water cisterns and wells.
Pumped media
• For pumping clear water (fresh water),
rainwater or light detergent solutions /
domestic water.
• The maximum temperature of the
pumped liquid must not exceed +35°C.
• This pump must not be used to pump
flammable, gaseous or explosive liq-
uids.
• The pumping of aggressive liquids (ac-
ids, lyes, silo seepage juice etc.), as well
as liquids with abrasive (sanding) mate-
rials (sand) must also be avoided.
The machine may only be operated with
original parts and original accessories
from the manufacturer.
Any other use is considered to be not in-
tended. The manufacturer excludes any
liability for resulting damages, the risk is
exclusively borne by the user.
Please note that our equipment has not
been designed for use in commercial,
trade or industrial applications. Our war-
ranty will be voided if the equipment is
used in commercial, trade or industrial
businesses or for equivalent purposes.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

5909404901

Table des Matières