Publicité
Les langues disponibles
Les langues disponibles
Mounting
6.4
Mounting the measuring line to the tank
DTA 10
1.
Select the threaded adapter (screw connector kit) suitable for
the tank connection.
Fig. 13: Mounting to tank with screw connector kit
2.
Lower the bottom part [1] to the bottom of the tank.
3.
Tighten the screw connector [2] so that the measuring line can
no longer be moved and that the connection is odour-tight.
4.
Use the enclosed nail cable clips to fasten the measuring line
[3].
– English –
1
Screw connector
for holding the
measuring line.
2
Connection
threads
(G ½ and G1)
3
Threaded adapt-
er (G1 to G1½)
4
Threaded adapt-
er (G1½ to G2)
5
Bottom part
30
Publicité
