Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CAUTION
6.5
Mounting the measuring line to the measuring instrument
INFO
DTA 10
Damage to the measuring line
Never bend or damage the measuring line.
1.
Shorten the measuring line [1] to the required length (if neces-
sary).
2.
Push the hose clamp [2] onto the measuring line [1].
3.
Pull the measuring line [1] over the hose adapter [3] at the lower
right end of the measuring instrument.
4.
Clamp the hose clamp [2] onto the hose adapter [3] using suita-
ble pliers.
It is possible to connect the device to existing measuring lines
(for example, of Unitop or Unitel) using the enclosed hose con-
nector. The second hose clamp is enclosed for this purpose.
If you use existing measuring lines, verify that the measuring
line extends to the bottom of the tank.
– English –
Mounting
31
Publicité
Table des Matières
