Oase biOrb EARTH Notice D'emploi page 36

How to proceed:
1. Remove the cover of the liquid reservoir filling port.
2. Place the funnel on the filling port.
3. Pour biOrb Humidimist (→ Accessories) into the funnel. A float switch shows when the liquid
reservoir is filled (on initial filling approx. 4 litres).
4. Remove the funnel from the filling port.
5. Close the filling port with the cover.
6. Confirm filling in the "OASE Control" APP or by using the button on the unit.
 Now the rain and mist functions are fully available again.
Switching on the unit
Switching on the unit: Insert the power plug of the power pack into the socket. The unit
switches on immediately.
Switching off the unit: Pull the power plug of the power pack.
How to proceed:
Connecting the unit with your smartphone/tablet
How to proceed:
36
BOB0332
BOB0333