Oase biOrb EARTH Notice D'emploi page 34

Installing the unit
Position the biOrb EARTH on a sufficiently large, load-bearing surface, for instance on a table or
on a cabinet.
NOTE
Protect the unit from direct sunlight.

Ensure that an electrical outlet is in the immediate vicinity.

Do not cover the ventilation openings of the unit.

Air at a temperature of up to 55 °C can exit the ventilation openings on the sides and cause

damage to plants or other heat-sensitive materials. Ensure sufficient clear space.
Ensure that there is sufficient space to access the unit.

Filling the unit
Access the unit and fill the biOrb EARTH as desired. (→ Access to the device)
A variety of decorative items and plants are available from OASE retail partners or at
orb.com.
NOTE
Ensure that the items used to fill the unit do not cover ventilation grilles, rain nozzles and sen-

sors. (→ Overview of function elements)
To ensure that the rain is true to nature, the rain nozzles must be aligned so that the entire

space gets rained on, if at all possible.
34
BOB0331
www.bi-