Dantherm CDP 35 Manuel D'entretien page 24

Mounting and installation instructions,
Condensate outlet The condensate outlet is located at the base of the dehumidifier. The unit has a drain
Illustration
Connection of
power supply
24
spigot intended for connection of a ½'' flexible or fixed water hose. If you choose to
have the outlet through the wall, a matching hole is made in the wall and the drain pipe
is connected to the dehumidifier before it is placed on the wall suspension bar.
It is important that the hose from the dehumidifier to the drainage has a fall of at least
2 % to make sure that the water runs away from the condensate tray.
As an alternative a condensate pump can be fitted at the water outlet to pump the water
to a drain.
The position of the condensate outlet is shown on the drawing – the unit is seen from
above.
Position of the drain:
Power is connected to the unit in accordance with the nameplate. Please see wiring
diagrams on pages 66-68.
Important! All electrical connections must be made in accordance with local power
supply company regulations!
continued