Starting, Operation - WIKA WUC-1 Série Mode D'emploi

6. Packaging / 7. Starting, operation
Unpack the transducer
1. Remove the transducer from the box.
2. Remove the outer protective bag and discard.
3. Carry the transducer (sealed in the inner bag), into the clean area.
EN

7. Starting, operation

Required tools: wrench (flats 19 and 16), screw driver (0.040" to 0.060" / 1 to 1.5 mm) and a pair of scissors,
allen key for WUC-16
Mechanical connection
Use this wrench flat for
screwing in!
8
Don't use this
wrench flat!
WIKA operating instructions, model WUC-1x