Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. Packaging / 7. Starting, operation
Keep the packaging, as it offers optimal protection during transportation (e.g. chan-
„
ging installation location, shipment for repair).
Ensure that the pressure connection thread and the connection contacts will not be
„
damaged.
Remove this protection cap only just before installing the transducer.
„
Mount the protection cap when removing and transporting the instrument.
„
Unpack the transducer
1. Remove the transducer from the box.
2. Remove the outer protective bag and discard.
3. Carry the transducer (sealed in the inner bag), into the clean area.
7. Starting, operation
Required tools: wrench (flats 19 and 16), screw driver (0.040" to 0.060" /
1 to 1.5 mm) and a pair of scissors, allen key for WUC-16
Mechanical connection
Don't use this
spanner flat!
Use this spanner flat
for screwing in!
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio WUC-1X
Product label (example)
P #
Product No.
S #
Serial No.
PIN assignment
Signal
Power Supply
Coded manufacture date
GB
7
Publicité
Table des Matières
