Aqua Medic Qube control LEDspot Mode D'emploi page 7

In purchasing this Qube control, you have selected a top quality product. It has been specifically designed for
aquarium use and has been tested by experts.
Programmable 2-channel light control (0 - 10 V) for Aqua Medic LEDspot
1. Technical Data
- 24 V safety voltage
- Dimensions: 7.4 x 7.4 x 1.5 cm
2. Unpacking
On unpacking, please check the light control immediately for any damage. In case of any problems, please
contact your dealer directly.
3. Included in shipment
Qube control

Remote control

Power supply (input 100-240 V AC 50/60 Hz; output 24 V DC 1.0 A)

4. Installation and programming
Fig. 1: Qube control and remote control
1. Control cable 0 – 10 V (fitted)
2. Not required for LEDspot
3. Connection for power supply
4. Program's symbol
5. Adjust setting
6. Twilight phase
7. Sunrise
8. Daylight phase
9. Sunset
10. Moonlight
11. Removable battery compartment (rear)
Safety hints:
The Qube control and remote control are not waterproof. Therefore, don't install them in wet, humid
places. Furthermore, they have to be protected from corrosion from salt water.
7
Operation Manual ENG