TFA 60.1515 Mode D'emploi page 11

TFA_No. 60.1515_Anleitung
Radio-controlled alarm clock
6.1 Battery replacement
• Change the batteries when the device functions become weak and
the seconds hand stops at 12 o'clock.
7. Troubleshooting
Problem
Clock hands do not move
The seconds hand stops
No DCF reception
20
13.07.2016 14:10 Uhr
Solution
➜ Ensure the batteries' polarity are
correct
➜ Change the batteries
➜ Wait for the DCF signal
➜ Change the batteries
➜ Press and hold the RCC button for
three seconds and start the initializa-
tion manually
➜ Wait for an attempt reception during
the night
➜ Choose another place for your pro-
duct
➜ Set the clock manually
➜ Check if there is any source of inter-
ference
Seite 11
Radio-controlled alarm clock
Incorrect indication
If your device fails to work despite these measures contact the retailer
where you purchased the product.
Waste disposal
This product has been manufactured using high-grade materials and com-
ponents which can be recycled and reused.
Never dispose of empty batteries and rechargeable batter-
ies with ordinary household waste.
As a consumer, you are required by law to take them to
your retail store or to an appropriate collection site
depending on national or local regulations in order to pro-
tect the environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
This product is labelled in accordance with the EU Waste
Electrical and Electronic Equipment Directive (WEEE).
➜ Restart the instrument according to
the manual
➜ Press the RESET button using a pin
➜ Change the batteries
21