Trevi CMP 542 USB Mode D'emploi page 12

ENGLISH
LISTENING TO USB
USB PLAYBACK
The USB input jack is compatible with a data flash memory key, it is not guarantee the
compatibility with MP3 players with proprietary software.
1. Press and hold the STOP/USB button to select USB playing mode while the FUNCTION switch on
main unit is set to CD/MP3/USB position.
2. Connect the USB to the USB INPUT. The CD will display total number of tracks stored inside the
USB.
3. Press the PLAY/PAUSE/STANDBY button to start playing. Press the PLAY/PAUSE/STANDBY
button once again to temporarily stop.
4. Press the STOP/USB button to stop playing. The display will show total number of tracks.
5. The function are the same as per MP3 playback.
6. To exit USB operation, press and hold STOP/USB button to return the CD mode.
COMPACT DISC MAINTENANCE
1. Always use a compact disc bearing the mark as shown.
2. Notes on handling discs
 Removing the disc from its storage case and loading it.
 Do not touch the reflective recorded surface.
 Do not stick paper or write anything on the surface.
 Do not bend the disc.
3. Storage
 Store the disc in its case.
 DO not expose discs to direct sunlight or high temperatures, high humidity or dusty places.
4. Cleaning a disc
 Should the disc become soiled, wipe off dust, dirt and fingerprints with a soft cloth.
 The disc should be cleaned from the center to the edge.
 Never use benzene, thinners, record cleaner fluid or anti-static spray.
 Be sure to close the CD door, so the lens is not contaminated by dust.
 Do not touch the lens.
CORRECT
FROM THE CENTRE TO THE EDGE
12
CMP 542 USB
INCORRECT