Servicing; Fitting And Removing The Racks - Atlantic SFLC DIG2 Mode D'emploi

-
Carry out the following checks to make sure that the programming
orders are being correctly transmitted:
comfort
signal to be
transmitted
measurement
between the
pilot wire and
the neutral
-
For programming by pilot wire or bearer current, the frost protection
or shedding orders take priority.
-
It takes around 12 seconds to switch from Comfort mode to Eco
mode.
-
It takes around 5 minutes to switch from Comfort -1/-2 mode to
Comfort mode.
Switch off the electricity supply to the appliance before carrying out any
maintenance on it. You must remove dust from the appliance around
twice a year to maintain its performances.
Never use abrasives or solvents.

FITTING AND REMOVING THE RACKS

e
co
230
0
volt
volt
s
topping
f
rost
heating
protection
s
hedding
-115 + 115
volt volt
negative positive

SERVICING

24
comfort comfort
-1° c -2° c
230 230
volt
3
for s for
volt
7
s