Maintenance And Care - FUXTEC E312D Notice D'instruction D'origine

RedBack_Trimmer E312D_de-en-fr.book Seite 28 Dienstag, 8. März 2016 11:15 11

Maintenance and care

WARNING!
Before performing any work on the garden
tool, remove the battery.
Cleaning
WARNING!
Do not use water or liquid detergents.
 Remove dirt and dust from the housing
with a paintbrush and dry cloth.
 Remove grass clippings from the
underside of the trimmer.
 Keep the ventilation slots clean and free
of dust.
Changing the cutting head
 Press and hold down the lock button (Œ.).
 Loosen the cutting head by turning in an
anti-clockwise direction and remove (œ.).
 Attach the new cutting head by turning
clockwise. Tighten hand-tight.
Replacing the line spool
CAUTION!
Spare parts must conform with the require-
ments specified by the manufacturer. Use
original spare parts only or spare parts
authorised by the manufacturer.
Removal
 At the same time press both catches
together on the spool cover (Œ.) and
remove the cover (œ.).
 Remove the old line spool (3.) and the
spring (4.).
œ8
 Clean the spool housing, spring and
cover. Use a clean cloth.
Install
 Insert the spring (thin end upwards) into
the spool housing (5.).
 Pull the line ends of the new line spool out
of the two opposing retaining slots of the
spool housing (6.).
 Insert the new line spool into the spool
housing (7.).
 Re-attach the cover to the spool housing,
ensuring that both catches click into
position (8.).
 Pull on the line ends (9.) to release the
lines from the retaining slots.
E3ŒœD