Hansgrohe PuraVida 157751 Série Instructions De Montage / Mode D'emploi / Garantie page 10

English
Install the thermostatic mixer sleeve.
9
Install the volume control sleeve.
Install the escutcheon.
Place a dab of waterproof sealant at each
10
grout joint.
Lubricate the adapter stems with a small
11
amount of white plumber's grease (1).
2.
Install the handle adapters and screws (2).
Tighten the screws using a 3 mm Allen wrench.
Install the volume control handle (3).
3.
Tighten the screw using a 2 mm Allen wrench.
Install the thermostatic mixer handle so that
the safety stop override button is at the 12:00
position (4).
1.
4. Tighten the handle screw using a small slot-
head screwdriver.
10