Grundig CMS 4000 BT DAB+ Mode D'emploi page 29

SETTINGS
Time Setting
1
To set the time, your micro system must be
in sleep mode first. Then press and hold the
CLOCK
» « button for about 2 seconds.
– Display: » 24 HOurs «.
2 Select the time format (12 or 24 hours) by
pressing button »
with the » CLOCK
– Hours tick.
3 Select the time by pressing button »
or » « and confirm using the »
button.
– Minutes tick.
4
Set the minutes by pressing button »
or » « and confirm using the »
button.
– Display: current time.
Notes:
Some RDS stations transmits an RDS time
7
signal. If the selected RDS station transmits
time information, the time can be set auto-
matically.
Press » INFO « repeatedly until the time is
displayed. The » RDS CLK « display means
that the time signal is not yet received. Wait
for the time to display.
The time must be reset after a power outage
7
or after disconnecting the device from the
main line.
---------------------------------------------------------------------------------------------------------------------------------------
« or » « and confirm
« button.
CLOCK
CLOCK
Alarm Setting
1
To program the alarm, your micro system
must first be in sleep mode. Then press the
ALARM
» « button on your remote control
and hold it down for about 2 seconds.
– Display: » TIMER «.
2 Proposal and display of the different
alarm programs: » disC », » USB « or
» TuneR «. Press the button »
and confirm using the »
«
– Hours tick.
«
3 Select the time by pressing button »
» « and confirm using the »
button.
«
– Minutes tick.
«
4
Set the minutes by pressing button »
» « and confirm using the »
button.
– Volume settings blink.
The volume displays » VOL 12 «. Adjust the vol-
5
ume by pressing button »
confirm using the »
– You can adjust the volume between
» VOL 01 « and » VOL 31 «.
¥
6 The symbol »
screen of the minutes to confirm the program-
ming of the alarm.
Note:
If you want to disable the alarm, press the
7
» ALARM « button on the remote control
once and the alarm symbol »
appear from the screen.
« or »
ALARM « button.
ALARM
ALARM
« or »
ALARM « button.
« will then display on the right
¥
« will dis-
ENGLISH
«
« or
«
« or
«
« and
29