Residual Risks - Parkside POFA 12 A2 Traduction Des Instructions D'origine

GB IE
of injury.
• Move the power tool against the
workpiece only when it is turned
on. Otherwise, there is a risk of kick-
back if the attachment tools jam in the
workpiece.
• Do not put your hands in the
cutting area and neither on the
cutter. Hold the upper handle
or the motor housing with your
other hand. When holding the milling
cutter with both hands, they cannot be
injured by the cutter.
• Never mill over metal objects, nails
or screws. The milling cutter can be dam-
aged and lead to increased vibrations.
• Use suitable detectors in order to
find hidden supply lines or ask
the local utility company. Contact
with electrical cables can lead to electric
shock and fire, contact with a gas pipe
can result in an explosion. Damage to
a water pipe can lead to property dam-
aged and electric shock.
• Do not use any blunt or damaged
tools. Blunt or damaged tools can
cause uncontrollable situations.
• Hold the power tool tightly with
both hands while working and en-
sure a secure footing. The power tool
is guided more securely with both hands.
• Wait until the power tool has
stopped before placing it down.
The attachment tools can jam and lead
to a loss of control over the power tool.
• Avoid contact with the tool or
the workpiece immediately after
processing. The parts may be hot and
cause burn injuries.
• Use only milling cutters which have the
correct shank diameter and are suitable
for the speed of the power tool.
• Do not use any accessories
that are not recommended by
30
PARKSIDE. This can result in electric
shock or fire.

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Injuries caused by moving parts;
b) Ear damage if working without ear pro-
tection;
c) Lung damage, if suitable respiratory
protection is not worn;
d) Eye injuries if no suitable eye protection
is worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Observe the safety informa-
tion and notes on charging
and proper use as shown
in the instruction manual
for your battery and char-
ger from the PARKSIDE
X 12 V TEAM series.
A detailed description of the