Quantum rdx 8000 Directives D'installation page 8

LAUNCH RDX 8000 RMI
All functions are accessible through the Web-based interface RDX 8000 RMI.
To configure and monitor your RDX 8000, launch a Web browser on
the host computer. Copy the IP address from the RDX 8000 display into the
browser's address bar, then press Enter.
The following screen should appear:
Log in with the following default username and password:
User:
Password:
Note: You can set custom usernames, access levels and passwords through the user interface.
For details, refer to the User Guide available at www.quantum.com/ServiceandSupport/.
administrator
adm001
7