Storch Pro 62 60 00 Mode D'emploi page 61

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
Switch off and disconnect the machine for maintenance
and repair.
Never use the machine with a defective cable; this can
lead to an electric shock. Do not pull the machine at the
cable. Use only intact plugs and cables.
It can come for injuries or deaths by electric shock if the
cable is damaged. Hold the cable far from the lower part
of the machine, so that it cannot get into contact with the
blade. Lead the cable always to the back away.
Sollte die Maschine nicht richtig an die elektrische Anla-
ge angeschlossen werden, kann dies zu Todesfällen durch
Stromschlag führen. Für einen maximalen Schutz gegen
elektrische Schläge verwenden Sie bitte eine elektrische
Anlage mit Sicherheitsschalter.
Should the machine not be properly connected to the
electric system, this can lead to deaths by electric shock.
For a maximum protection against electric blows you use
please an electric system with safety switch.
Suggested maximum cable length 7 m, for longer cables
use a bigger cross section. With the use of the machine
with cable of insufficient cross section and/or excessive
length, this can lead to material damages or personal
damages.
Please use only admitted cables with two leaders.
Safety notes noise
The noise that is created during the operation of the
machine depends on many factors. All the possible appli-
cation types and the local regulations, such as the size of
the rooms and the features of the ground affect the deve-
lopment of the noise.
Therefore the local operator has to assess the effect and
order the precautionary wearing of ear protections.
Safety notes operation
Keep hands, feet and not sticking parts of the clothes
far from the machine parts located in work. The parts in
movement of this machine can cause heavy injuries and/
or damages.
With the use of a not completely mounted machine inju-
ries can originate to persons and/or things. Do not use the
machine, before this has been completely mounted. Keep
all connection elements closed.
Do not screw or rivet signs on the machine, you can
destroy the protective insulation! We recommend stickers!
Maintenance and repair by uncertified staff can lead to
injuries or damages and reduces all guarantee achieve-
ments.
Should the machine be exposed to water or rain, it can
come to deaths by electric shock. The machine must be
stored in a dry building.
61
Translation of the original instruction

Publicité

Table des Matières
loading

Table des Matières