BoomToneDJ DMX-192 Mode D'emploi page 26

V- Music Run Chases

Press one of the six Chase buttons to select your desired chase .

Press and release the Music/Bank-Copy button.

The corresponding LED will flash in the LCD.

Your chase will now run to the sound.
Note: When you exit a chase by pressing the Chase button, the controller will
VI- Adding a Step to a Chase

Press and hold Program Button for three seconds to enter the programming mode.

Select the chase 1 ~ 6 to which you wish to add a step.

Press TAP SYNC/Display and the LCD shows the scene and bank. This is the bank
containing the scene you wish to add.

Press TAP SYNC/Display again and the LCD shows the Chase that you have
selected.

Use the Up and Down buttons to scroll through the chase to reach the step after
which you wish to add a step.

Press MIDI/Add, the LCD will read one step number higher.

Press the Scene button you wish to add.

Press MIDI/Add again to add new step.

Press and hold the Program Button for three seconds to exit the programming
mode.
25