BoomToneDJ DMX-192 Mode D'emploi page 24

I- Chase Programming
You have to program scenes before you can program chases.

Press and hold the Program Button for 3 seconds to enter programming mode.

Choose any chase (1~6)to be programmed.

Select the desired Scene from any bank .Scenes are run in the order that they are
programmed into the chase.

Press the MIDI/Add button ,all the LED will flash 3 times.

Repeat steps 3 and 4 as many as you want. You can record up to 240 scenes into
one chase.

Press and hold the program Button for 3 seconds to exit programming mode.
II- Delete a step from a chase

Press and hold the Program Button for three seconds to enter the programming
mode.

Select the Chase 1 to 6 from which you wish to delete a step.

Press TAP SYNC /Display and the LCD shows the Chase that you have selected.

Use the Up/Down buttons to scroll through the chase to reach the step you wish
to delete.

Press Auto/Del and the scene will be deleted.

Press and the Program button for three seconds to exit the programming mode.
23
Chases