Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2-Unit Description
Front Control Panel
16.)
Scanners :To select any or all of 12 fixtures.
17.)
Scenes: To store or run scenes.
18.)
Page Select: To select page A for channel 1 to 8,or page B for channel 9 to 16.
19.)
LCD Display:4-digit showing values and settings chosen.
Bank (up ▲ and down ▼ ):30 banks are available for selecting.
20.)
21.)
Chases: TO select 1~6 chases.
22.)
Blackout: Disables all channel outputs.
23.)
Program: To activate the program mode. Display blinks when activated.
24.)
MIDI/Add: To control MIDI operation or activates save function.
25.)
Auto/Del: To select Auto run in chase mode or delete scenes and/or chases.
26.)
Music/Bank Copy: To trigger sound activation in Chase mode or to copy a bank of
scenes from one to another in program mode.
27.)
Tap SYNC/Display: In Auto Chase mode used to change the rate of chase and in
program mode change LCD display value.
28.)
Fade Time Slider: To adjust the Fade Time. Fade Time is the time it takes the DMX
Master to completely change from one scene to another.
29.)
Speed Slider: To adjust the rate of chase speed in Auto Mode.
Faders(1-8):To adjust the output level from 0~255 or the intensity from 0%~100%
16
Publicité
Table des Matières
