BoomToneDJ DMX-192 Mode D'emploi page 23

VI- Running Scene
Manual Run Scenes

When the power is first turned on, the unit is in manual scene mode.

If in Program mode, press and hold the Program button for three seconds and the
program LED will go out. The controller is now in Manual mode.

Be sure that the Auto & Music button's LEDs are off.

Select the Bank ,using the Up and Down Bank buttons that stores the scenes you
wish to run.

Press the Scene Button to run the scenes you selected.
VII- Auto Run Scenes
This function will run a bank of programmed scenes in a sequential loop .

Press Auto/Del once to activate the Auto Run mode.

Use the Up and Down Bank buttons to select a bank of scenes to run.

Now you can use the speed and fade sliders to adjust the scenes to your liking.
The fade setting should never be slower than the speed setting or the scenes will
not be completed.

You can change banks on the fly by pressing the Up and Down Bank buttons.
VIII- Music Run scenes

Press the Music/Band-Copy button and the corresponding indicator light will come
on in LCD.

Select desired bank that stores the scenes you wish to chase by using Up or Down
buttons or you can control via MIDI signals.

Press Music/Bank-Copy once more to exit.

automatically run the scenes that are in the last bank accessed. To 1

stop the movement of the lights either use the Blackout button or press Music if in
music mode or the Auto button.
22