Brita PURITY 1200 Clean Mode D'emploi page 13

1 Definition of Terms
Pressure Vessel
1
Filter Cartridge
2
Pressure Vessel Lid
3
Connector Head
4
Inlet Hose
5
Inlet Valve on the Inlet Hose
6
Outlet Hose to the Terminal Equipment
7
Locking
8
Kick Loop
9
Ejector Base
10
Mantle Handle
11
Transport Protective Cap
12
Bypass Setting Screw
13
Lid Handle
14
Reducer 1"– 3/4"
15
Flush valve with flush hose
16
2 General Information
2.1 Function and Application
The BRITA PURITY 1200 Clean and PURITY 1200 Clean Extra Water Filter Systems
optimise tap water for dishwashers for glasses, cutlery and crockery by means of
partial or full demineralisation.
In the BRITA PURITY 1200 Clean calcium and magnesium ions are selectively
removed from the drinking water via an ion exchanger using the flow method. This
prevents residues on the dishes during drying due to carbonate hardness and scale
deposits on important machine parts. This means that the dishwashers have a greatly
increased service life.
Furthermore, BRITA PURITY 1200 Clean Extra guarantees elimination of all salts in the
water by means of full demineralisation of the tap water, preventing them from being
deposited on glasses and cutlery.
2.2 Guarantee Provisions
The PURITY 1200 Clean and PURITY 1200 Clean Extra filter systems are subject
to the statutory guarantee of 2 years. A guarantee claim may be asserted only if all
instructions in this Handbook are followed and observed.
2.3 Storage/Transport
Adhere to the ambient conditions in the Technical Data (Chapter10) for storage and
transport.
The handbook should be seen as part of the product and kept for the whole service
life of the filter system and passed on to subsequent owners.
EN
11