Miele STB 201 Mode D'emploi page 58

U
Maintenance
,
Always disconnect the vacuum
cleaner from the wall outlet before
performing any maintenance or
cleaning.
To remove threads and or hair
wrapped around the roller
^ Cut any threads or hair that are
wrapped around the roller using a
pair of scissors.
The cut pieces will be drawn into the
vacuum cleaner the next time it is used.
More obstinate tangles or blockages
can be removed after opening the roller
cover.
^ Loosen the two locking screws using
a coin or screwdriver, and remove the
roller cover.
^ Remove any items stuck in the brush
compartment or wrapped around the
roller brush.
^ Replace the cover and tighten the
locking screws.
58