User Manual - English; Safety Notice - INTERSPIRO QS II BASIC Manuel De L'utilisateur

QS II BASIC MODEL
U S E R M A N U A L - E N G L I S H
This product, supplying breathing air to the user, has been tested in accordance with
EN 137 Type 2, and is to be used according local regulations.
Manufacturer:
Interspiro AB
Box 2853, 18728 Täby, Sweden.
1 SAFET Y NOTICE
The product must only be used with:
Interspiro cylinders:
Interspiro full face masks:
ATTENTION! BREATHING APPARATUS WITH TWIN CYLINDER CONFIGURATIONS: SPIROLITE 6.7L, COMPOSITE 6.8L (WITH
ALU-LINER) AND STEEL CYLINDERS 4L OR 6L, EXCEEDS THE TOTAL WEIGHT LIMIT ACCORDING TO 6.6 IN EN 137:2006.
The product must only be used by personnel in good health and trained in the use
of respiratory protective equipment. Individuals with beards or large sideburns may
not obtain an adequate seal. The apparatus must be maintained, serviced and tested
as described in this user manual, Interspiro service manuals and Interspiro test
instructions.
INTERSPIRO IS NOT RESPONSIBLE FOR
COMBINATIONS OF PRODUCTS, UNLESS PUT TO MARKET BY INTERSPIRO
CHANGES OR ADAPTATIONS MADE TO THE PRODUCT BY A THIRD PARTY
Changes to this document - necessitated by typographical errors, inaccuracies of
current information or improvements and changes of equipment - may be made at any
time without prior notice. Always refer to www.interspiro.com for product updates,
document updates and service bulletins. Exposure to extreme conditions may require
other actions than described in this manual. The guarantees and warranties specified
in the conditions of sale are not extended by this Safety Notice.
8
Spirolite 3.4L or 6.7L
Composite 6.8L or 9.0L
Steel 4L or 6L
Inspire-series
Respire-series
S-series
Spiromatic-series