Make Gas Connection - KitchenAid KCGS550 Manuel Du Propriétaire

3. Remove the attachment screws for the selected bracket
locations from the bottom of the cooktop base.
A. Attachment screw holes for optional front and back location
B. Cooktop base bottom
4. Attach brackets to cooktop base bottom with bracket
attachment screws. Securely tighten screws.
A. Cooktop
B. Cooktop base
C. 2" (5.1 cm) bracket attachment screw
D. Clamping bracket (extends far enough beyond cooktop base to
allow installation of clamping screws)
E. Countertop

Make Gas Connection

WARNING
Explosion Hazard
Use a new CSA International approved gas supply line.
Install a shut-off valve.
Securely tighten all gas connections.
If connected to propane, have a qualified person make
sure gas pressure does not exceed 14ʺ (36 cm) water
column.
Examples of a qualified person include: licensed heating
personnel, authorized gas company personnel, and
authorized service personnel.
Failure to do so can result in death, explosion, or fire.
Typical flexible connection
1. Apply pipe-joint compound made for use with Natural and
propane gas to the smaller thread ends of the flexible
connector adapters (see C and G in the following illustration).
2. Attach one adapter to the gas pressure regulator and the
other adapter to the gas shutoff valve. Tighten both adapters.
11