Information And General Rules; Marking And Identification; Important; Explanation Of Symbols - NIBBI Bertolini FC 120 Manuel D'utilisation Et D'entretien

INFORMATION AND GENERAL RULES

S PA R E PA R T S - Yo u a r e h i g h l y
recommended to use only GENUINE
SPARE PARTS. Orders must be made
observing the rules given in the Spare
Parts Catalogue.
ENGINE SERVICING - The regulations for
using and servicing the engine are given
in the appropriate booklet, a copy of
which is provided with each machine.
NOTE - The terms RIGHT and LEFT used
in this manual to locate the various
components always refer to the normal
travel direction of the vehicle, that is to
the machine seen by the operator in the
driver's position and with the Mower
mounted as an accessory of normal use.
The abbreviation 1+1 indicates the model
with two gears, one forward and one
reverse.

EXPLANATION OF SYMBOLS

Throttle Control
Clutch control
Direction of travel
CE PLATE SERIAL NUMBER

MARKING AND IDENTIFICATION

The Machine's serial number is printed on
the top of the gearbox. The "CE" mark on the
column support.
On receiving the machine check for the CE
label.

IMPORTANT!

Whenever requesting technical service or
ordering spare parts, always give the serial
number of the machine in question.
17
IT
GB
F
D
DK
RO