Warning Signals; Safety Warnings - NIBBI Bertolini FC 120 Manuel D'utilisation Et D'entretien

WARNING SIGNALS

IT
This symbol is to attract your
GB
attention and indicates that
care for your safety must be
F
meticolously followed, and must
be brought to the attention of all those who
D
use the machine. This manual of instructions
is part of the Use and Maintenance Manual
DK
supplied with the machine and by the engine
manufacturer, a copy of which is supplied with
RO
every machine.
Consult the Use and Maintenance
manual when you see this symbol
on the machine.
ATTENTION! - Danger of scalding.
ATTENTION! - Keep children away
from the machine.
ATTENTION! - Danger due to blades
in operation. Keep hands and feet
clear.
ATTENTION! - Danger due to blades
in operation and rotating parts.
Keep hands and feet clear.
ATTENTION! - Danger of fi re.

SAFETY WARNINGS

1) This machine has been designed and
manufactured for being used by one
operator only, and is driven by means of
the appropriate handlebars. Any other use
is not permitted.
2) Before operating the machine, read the
Use and Maintenance manual thoroughly,
so that you are fully aware of all the
operating controls and safety aspects of
the machine.
3) Do not under any circumstances transport
people or objects on the machine.
4) Always ensure that the machine's safety
devices are correctly mounted and in
perfect working condition.
5) Before use, check that all the controls, in
particular the clutch, the Motorstop and
the brakes (if fi tted) are in good working
order.
6) Any modifications or spurious parts
being fitted without the manufacturers
consent will nullify the guarantee, and
any possible resulting damage will not be
answered for.
7) This machine must not be used by
children or inexperienced persons.
8) Before operating the machine, check
that the area is clear and free of debris
and that there are no people within the
working area (danger zone). The operator
will be held responsible for the safety of
third parties, if these are found within the
working area of the machine. Do not use
the machine under these conditions.
9) Keep clear of the cutting blades at all
times while the machine is in operation.
Pay particular attention when reversing;
keep hands and feet clear.
10) Use the machine only with the handles in
the correct working position. This allows
a safe working distance between the
operator and operating area.
11) Use only original accessories and spare
14