Publicité
Les langues disponibles
Les langues disponibles
User Manual
Installation
Setting up the Transmitter
Connect the Transmitter's HDMI IN port to
1.
the HDMI sources' HDMI OUT port with an
HDMI cable. The Transmitter has two HDMI
inputs for connecting multiple HDMI source
devices, such as a PC, PS4 or Blu-ray
Player.
Connect the Transmitter's HDMI OUT port to
2.
the HDMI display/projector's HDMI IN port
with an HDMI cable for the local loop-
through connection, if required. Press the
Source/Input
display/projector to select the appropriate
HDMI video input.
3.
Connect the supplied power adapter to the DC IN jack of the Transmitter and a wall socket. The LED
indicator in the Power button lights up blue when the Transmitter is connected to mains power.
Setting up the Receiver
1. Connect the Receiver's HDMI OUT port to
the HDMI display/projector's HDMI IN port
with an HDMI cable. Press the Source/Input
button of your HDMI display/projector to
select the appropriate HDMI video input.
2. Connect the supplied power adapter to the
DC IN jack of the Receiver and a wall socket.
The LED indicator in the Power Button lights
up blue when the Receiver is connected to
mains power.
IR Extender Function
To control your HDMI source device remotely using the IR Extender function, use the following
instructions.
1. Ensure that the IR Eye on the Receiver unit is positioned to receive IR commands from your remote
control.
2. Connect the supplied IR Blaster Cable to the IR OUT on the Transmitter unit.
3. Position the IR Blasters Eyes near the IR Ports of your source devices.
You can now control your HDMI source device from the display/Receiver side of your installation, using
the original remote control of your HDMI source device. If necessary you can change the IR Frequency
from its default 47KHz to either 56KHz or 38KHz by pressing the IR button on the Wireless Extender's IR
remote control. The first press will display the current frequency being used via the Extenders OSD,
pressing the IR button again (whilst the status is still displayed on the OSD) will move to the next IR
frequency, a further press to the next frequency and so on in the following order: 47Khz >> 56KHz >>
38KHz >> 47KHz and so on.
button
of
your
HDMI
English
HD Media Player
Blu-ray Player
OR
HD Projector
HD TV
Publicité
