Publicité
Les langues disponibles
Les langues disponibles
User Manual
Receiver
Top Panel & LEDs
Source Button
Press to switch between HDMI inputs.
Back Panel & Ports
DC IN
Connect the supplied USB power supply.
IR Remote
Power Button with LED indicator
Press to turn the Receiver on/off. The LED in the
power button will be blue when the power is on,
and turns red in standby mode.
Source LEDs
One of these two LED indicators is lit in solid
blue to show which HDMI input is being used.
HDMI OUT
Connect the Receiver to an HDMI equipped display
or projector, via an HDMI cable.
POWER
Press to turn the Transmitter or Receiver on/off.
INFO
Press this button to display system related information via the OSD on
the HDMI display/projector connected to the Receiver.
TRANSMITTER NO.
Press this button to switch between Transmitters. Please refer to the
Using Multiple Transmitters section of this manual.
SOURCE
Press to switch between the HDMI devices connected to the
Transmitter.
IR
Press to switch the IR Blaster frequency to meet the HDMI source
device's requirement. It can switch the IR Blaster frequency from 47K to
56K to 38K.
English
Publicité
