Scope Of Delivery; Application Instructions - HBM S9M Notice De Montage

8
1

Scope of delivery

• 1 S9M force transducer
• 1 S9M mounting instructions
• 1 Manufacturing certificate
Accessories (not included in the scope of supply):
• Knuckle eyes for mounting the force transducer
S9M 500 N and 1 kN
S9M 2 kN - 10 kN
S9M 20 kN - 50 kN
2

Application instructions

The S9M type series transducers are suitable for measuring tensile and com­
pressive forces. Because they provide highly accurate static and dynamic
force measurements, they must be handled very carefully. Particular care
must be taken when transporting and installing the devices. Dropping or
knocking the transducers may cause permanent damage.
Section Specifications (VDI/VDE2638 standards) lists the permissible limits
for mechanical, thermal and electrical stress on Page 20. It is essential that
these are taken into account when planning the measuring set-up, during
installation and ultimately, during operation.
HBM
Order No. 1-U1R/200KG/ZGW
Order No. 1-U2A/1T/ZGUW
Order No. 1-U2A/5T/ZGUW
S9M
A3019-5.0 en/de/fr