Meister MET36ME Traduction Du Manuel D'utilisation Original page 56

MW-5459600-Bedien-1807_(98) 18.07.18 09:44 Seite 56
Use of dust extraction can
reduce dust related hazards.
h) Do not falsely assume a level
of safety and do not overstep
the safety rules for power
tools, even if you are familiar
with the power tool after many
uses. Careless action can lead
to serious injuries within a
fraction of a second.
Use and care of the power tool
a) Do not overload the device.
Use the appropriate power
tool for the task on hand.
The correct power tool will do
the job better and more safely
at the rate for which it was
designed.
b) Do not use the power tool if
the switch is defective. Any
power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the
mains and/or remove the
rechargeable battery before
making any adjustments,
changing accessories, or
storing the power tool. This
precautionary measure also
prevents accidental starting of
the power tool.
d) Keep power tools not in use
out of the reach of children. Do
not let people who are not
familiar with the power tool or
who have not read these
56
instructions use the device.
Power tools are dangerous in the
hands of untrained users.
e) Take good care of your device.
Check to ensure that moving
parts function properly and do
not jam, check for breakage of
parts or damage that may
impair the power tool's
operation. Have damaged parts
repaired before use. Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and
clean. Carefully maintained
cutting tools with sharp cutting
edges are less likely to jam and
are easier to control.
g) Use the power tool,
accessories, insertion tools,
etc. according to these
instructions . Consider the
working conditions and the
task to be carried out. Using
the power tool for purposes for
which it was not intended may
result in a hazardous situation.
h) Keep the grips and the grips
surfaces dry, clean and free of
oil and grease. Slippery grips
and grips surfaces ensure no
safe operating and sure control
of the electric tool in unforeseen
circumstances.
Use and care of cordless tool
a) When recharging a battery,
only use chargers that have
been recommended by the
manufacturer. With a charger